×
free-top-img-bst.png

Jigsaw - Special Applications

Special Cutting Applications.
Ceramic, Plastic, Aluminium, Acrylic

showing all 8 results

Set Descending Direction

Grid  List 

  • Jigsaw Blades Aluminium - Curved Cuts

    Jigsaw Blades Aluminium - Curved Cuts

    Jigsaw Blades Aluminium - Curved Cuts

    Prices Inc. GST
    1 + $21.04 / Each
    - +
  • Jigsaw Blades Ceramic - Coarse

    Jigsaw Blades Ceramic - Coarse

    Jigsaw Blades Ceramic - Coarse

    Prices Inc. GST
    1 + $30.76 / Each
    - +
  • Jigsaw Blades Ceramic - Fine

    Jigsaw Blades Ceramic - Fine

    Jigsaw Blades Ceramic - Fine

    Prices Inc. GST
    1 + $30.76 / Each
    - +
  • Jigsaw Blades Acrylics

    Jigsaw Blades Acrylics

    Jigsaw Blades Acrylics

    Prices Inc. GST
    1 + $40.02 / Each
    - +
  • Jigsaw Blades Aluminium - Fast Cuts

    Jigsaw Blades Aluminium - Fast Cuts

    Jigsaw Blades Aluminium - Fast Cuts

    Prices Inc. GST
    1 + $21.04 / Each
    - +
  • Festool Jigsaw Blade S 75/4/5 486546

    Festool Jigsaw Blade S 75/4/5 486546

    Festool Jigsaw Blade S 75/4/5 486546

    Prices Inc. GST
    1 + $13.09 / Each
    - +
  • Festool Jigsaw blade S 105/4/5

    Festool Jigsaw blade S 105/4/5

    Festool Jigsaw blade S 105/4/5

    Prices Inc. GST
    1 + $21.56 / Each
    - +
  • Leigh Guide Bush Adaptors

    Leigh Guide Bush Adaptors

    Leigh Guide Bush Adaptors

    The Leigh dovetail jigs use a guide bush system to guide the router bit around the fingers of the template. A guide bush is held in a rebated 30mm hole, making all of the bushing flush with the rest of the router base other than the guide itself.

    The adaptor fits into the base of the router, and usually is held in place using screws. As the bases of routers are not standardised, Leigh have a range of adaptors to suit most common routers. These adaptors are not suited to all routers, but a range of larger 1/2" shanked routers.

    Guide bushes are not limited only to Leigh jigs, but can be used as an alternative to pattern router bits. The router bit needs to be smaller in diameter than the inside diameter of the guide bush, and rotate freely. The jig it is being used with needs to made to accommodate this difference, the OD (outside diameter) of the template to the OD of the bit.
    Learn More

showing all 8 results

Set Descending Direction

Grid  List