The STANLEY Hydraulic’s ID07 Impact Drill Wrench has the work-site proven swing-hammer mechanism that will deliver high performance and long-term service.

The ID07 is a high torque impact wrench used for tightening and loosening nuts and driving lag bolts. Delivers impact torque of up to 500 ft. lbs. / 675 Nm.

The ID07 can drive wood augers into the hardest saltcured or creosote-treated poles. Delivering impact torque of up to 675 Nm  / 500 ft. lbs.

The integral Stanley Hyrevz gear motor is manufactured to exacting standards to deliver maximum efficiency.

The built-in reverse-check valve prevents operating the wrench when reverse- plumbed to the hydraulic system, ensuring a long operating life for the hydraulic seals.

Setting the tool for open- or closed-centre operation is as simple as opening or closing a valve.

Available with friction ring or pin type socket retainer.



Large trigger

Reverse-flow check valve prevents operation if the tool is plumbed backwards

Built in selector for Open Centre or Closed Centre systems

Feathering ON/OFF

7/16 quick change chuck or 1/2 inch square drive



Capacity: 7/16-in Quick Change or 1/2-in Square Drive

Torque: 500 ft. lbs. / 675 Nm

Input Pressure: 750 - 2000 psi | 50 - 140 bar

Weight: 7.2 lb / 3.3 kg

Length: 8.5 in. / 21.6 cm

Width: 4.5 in./ 11.4 cm

Height: 10 in. / 25.4 cm

Ports: -8 SAE O-Ring

Motor: Stanley Hyrevz Gear

Maximum Flow: 4 - 12 gpm / 15 - 45 lpm

Email for quote