Crimping connectors with the Stanley Hydraulic Tools CT Series crimpers is quick and easy. They are 5-10 times faster than hand-pumped tools and more than twice as fast as high pressure double acting crimpers. The CT Crimpers require no booster or intensifier which means they can be operated directly from the hydraulic circuits already installed on line trucks, dedicated power units, or from one of the STANLEY portable Power Units. Swivel Design on all models provides 360° continuous rotation of the die head for easy alignment to give higher quality crimps.
1650 Models allow the use of the CT on almost any hydraulic system of at least 1,650 psi (114 bar). An accurate, built in relief valve ensures that at these system pressures and higher, a full die load is achieved preventing over-crimping.
The CT10 is available in 4 models furnished with one of the following heads:
- Burndy Style Y35 head
- Kearney Style PH2 head
- Burndy Style Y750 head with 1-1/2 inch opening
- Kearney Style WH3 head with 1-1/2 inch opening.
The CT10 provides a crimping force of 11 or 12 tons / 10,000 or 10,900 kg depending on the model.
Features
- 5 – 10 times faster than battery or high pressure tools
- Easier, quicker and less labor intensive to use than hand pump or pop tool
- Operate from truck system pressure – no high pressure intensifier required
- An accurate built in pressure relief ensures that a full die load is achieved at the minimum 1650 psi and prevents over crimping if higher pressure is present
- Patented open center/closed center selector that permits use on either type of hydraulic system.
- Easy and accurate adjustment can be made with common tools
- Double Acting. This means that you have pressure to crimp and pressure to retract the ram which eliminates die “hang-up” on the connector. Double acting also means quicker crimps than with battery or high pressure tools which are singleacting spring return
- Continuous 360° rotation for easy crimp alignment
- Work at all temperatures. Won’t die in the cold or slow down in the heat
- Reverse-flow check valve to prevent operation if tool is plumbed backwards
Specifications
Application | Hydraulic powered crimping of electrical connections that require 12 tons of crimping force |
Capacity | Varies by model number |
Hydraulic Flow | 3-9 gpm / 11-34 lpm |
Pressure | 1650-2500 psi / 114-172 bar |
Weight | 7.7 kg |
Length | 57 cm |
Width | 18 cm |
Connection | 3/8 in. Male Pipe Adapter to -8 SAE port |
Supplier Part Number | CT10016N |
---|---|
Product Brand | Stanley |
Pack Name | EACH |
- Stanley IW16 Hydraulic Underwater Impact Wrench - 1in Sqdr OC CE [IW16350]Add to Wish List1 + $13,904.00 Inc GST / EACH
- Stanley Hydraulic SK58 Underwater Sinker Drill Air Flush 1 inch Hex [SK58310]Add to Wish List1 + $15,099.15 Inc GST / EACH
- Stanley IW12 Hydraulic Underwater Impact Wrench - 3/4 in Sq Drive [IW1234001]Add to Wish List1 + $9,874.70 Inc GST / EACH
- Stanley IW24 Underwater Hydraulic Impact Wrench - 1-1/2in Sqdr OC [IW24360]Add to Wish List1 + $25,647.60 Inc GST / EACH