Stanley PD45 Hydraulic Post Driver Oc All Sign Posts [PD45131]

The PD45 Post Driver is the most versatile tool of its type available. The standard PD45 will drive posts of almost any configuration, including “U” channel, round or square.

Features:
Versatile:
The most versatile tool of its type available, having the capacity to drive a wide range of posts including #2, #3, & #4 lb/ft "U" channel, #3 & #4 Strong Back "U" channel, #1 delineator, up to 2-5/8 inch round, or up to 2-1/2 inch square posts.
DOT Requirements:
The PD45132G is specifically designed to meet State Department of Transportation (DOT) requirements for driving breakaway posts and delineators
Remote Control:
The PD45131 is controlled by a remote on/off valve that allows the operator to position the post driver and control its operation from a valve that is remote from the driver. 
Trigger:
- Offered in three trigger options; two have the trigger in the handle (Valve-in-Handle) and one has a remote on/off. Both trigger Valve-inHandle models have an ON/OFF trigger adjacent to a guiding handle. 
- The trigger extends the full length of the handle allowing the operator to activate the post driver at any position of its length. 
- The trigger is “spring loaded” to the OFF position. 
Ease of Use:
- Lifting eye 
- Dual guiding handles 
- ON/OFF trigger next to guide handle (model dependent) 
- Flush faced quick disconnect couplers. 
- Multiple post adapters that allow the PD45 to be used on smaller posts of different shapes. 
 

Specifications:

Application	Drives a variety of shapes and sizes of sign posts
Capacity	U-Channel Posts, Square Posts, Round Post, Delineators
Hyd. Flow	7-9 gpm / 26-34 lpm
Weight	65 lbs / 29 kg
Length	30 in. / 76 cm
Width	10 in. / 25 cm
Connection	3/8 in. flush face quick disconnect couplers
Pressure	140 bar