Inc GST
Buy 1 + Units: $6,173.20 / EACH
Availability: In stock
SKU
P119475
Stanley Submersible Pump, Ce SM50100
7-12 gpm / 26-45 lpm
Flush face quick disconnect couplers
500 gpm output
7-12 gpm / 26-45 lpm
Flush face quick disconnect couplers
500 gpm output
The SM50 Water Pump is a high-performance centrifugal type pump that doesn't require priming. Featuring a contaminant-tolerant gear motor, the pump is uniquely designed for continuous high-speed operation without the need for spindle bearing lubrication or replacement. The semi-closed impeller is made of cast stainless steel, which makes it corrosion-resistant. The drive shaft of the pump is equipped with a series of seals that effectively keep hydraulic fluid and pumped water in place while allowing the pump to run dry without any sudden seal failure.
Equipped with dripless flat-faced HTMA quick couplers, the SM50 is easy to connect and disconnect from the hydraulic system. The water outlet of the pump is 3-inch pipe thread fitted with a 3-inch groove fitting, which allows for the easy connection of a cam hose end fitting.
Features
Specifications
Equipped with dripless flat-faced HTMA quick couplers, the SM50 is easy to connect and disconnect from the hydraulic system. The water outlet of the pump is 3-inch pipe thread fitted with a 3-inch groove fitting, which allows for the easy connection of a cam hose end fitting.
Features
- Capacity: The SM50 can draw down water to a depth of 3.5 inches
- Putting the SM50 in a sump will allow it to pump all but 3.5 inches of water remaining in the sump.
- The pump will handle clear water and water containing up to 10% solids.
- Motor Contaminant-tolerant gear motor uniquely designed for continuous highspeed operation. Drives the impeller directly - no spindle bearings that require periodic lubrication or replacement.
- Run Dry: A series of seals on the drive shaft effectively keep hydraulic fluid and pumped water where they belong while allowing the pump to be run dry without sudden seal failure.
- Ease of Use: The SM50 is fitted with dripless flatfaced HTMA quick couplers for easy connecting and disconnecting of the pump and hydraulic system.
- The water outlet is 3-inch pipe thread fitted with a 3-inch groove fitting to which can be connected a cam hose end fitting.
- Maintenance: Access to the pumping chamber for cleaning requires the removal of only two capscrews.
- The motor with the impeller attached is then easily removed from the pump casing.
- Durable: The cast stainless steel, semi-closed impeller resists corrosion.
- Filter: The integral screen effectively keeps solids larger than 3/8 of an inch out of the pump.
Specifications
Outlet Size | 3 - inch NPT / 3 - inch Camlock |
Output Capacity | 1890 lpm |
Weight | 9.5 kg |
Length | 26.7 cm |
Width | 25.4 cm |
Input Pressure | 69 – 138 bar |
Input Flow Range | 26 – 45 lpm |
Porting | - 8 SAE ¾-16 Straight Thread |
Connector | 3/8 Flush-face HTMA Coupler |
Supplier Part Number | SM50100 |
---|---|
Product Brand | Stanley |
Pack Name | EACH |
More from Stanley
- Stanley Underwater Hydraulic Breaker/Driver - 1 inch Hex CE [BR45350]Add to Wish List1 + $7,803.95 Inc GST / EACH
- Stanley CH18 Hydraulic Medium Duty Underwater Chipping Hammer CE [CH18311]Add to Wish List1 + $8,666.90 Inc GST / EACH
- Stanley CS06 Underwater Hydraulic Chainsaw 15" Bar OC/CC [CS06920]Add to Wish List1 + $4,611.75 Inc GST / EACH
- Stanley CH15 Underwater Chipping Hammer 8 GPM CE [CH1533101]Add to Wish List1 + $7,398.60 Inc GST / EACH
- Stanley BR67 Underwater Hydraulic Breaker 1-1/8in CE [BR67320]Add to Wish List1 + $8,076.20 Inc GST / EACH