Galvanised Chemical Studs - 20 x 260mm
Chemical Studs are single unit non expansion type fasteners that are used in pre-drilled holes.
They comprise of a chisel point stud available in flat cut or external hexagon type head, a nut and washer.
Fixing of the stud is achieved by inserting a suitable curing resin into the hole using a glass chemical capsule or injection type adhesive system.
The stud is then inserted into the hole and rotated either by hammer drill for (glass capsule) or hand for (injection type) to allow for proper setting into the resin.
Anchor can be loaded once appropriate curing time has been reached.
Features:
Good load capability
Non expanding type fastener
Resistant to vibration
Complete sealing of hole
Can be installed close to edge
Reduced spacing between anchors
Excellent holding power in weak base materials
20 x 260mm
- Hole Size: 24mm
- Fastens Material up to 72mm
- (5/bx)
Fixing of the stud is achieved by inserting a suitable curing resin into the hole using a glass chemical capsule or injection type adhesive system.
The stud is then inserted into the hole and rotated either by hammer drill for (glass capsule) or hand for (injection type) to allow for proper setting into the resin.
Anchor can be loaded once appropriate curing time has been reached.
Features:
Good load capability
Non expanding type fastener
Resistant to vibration
Complete sealing of hole
Can be installed close to edge
Reduced spacing between anchors
Excellent holding power in weak base materials
Specs:
20 x 260mm
Hole Size: 24mm
Fastens Material up to 72mm
(5/bx)
Supplier Part Number | CPS20260G[1] |
---|---|
EAN Code | 9314818501590 |
Pack Name | EACH |
Finish | Galvanised |
Pack Quantity | 10 |
Length - Metric | 260mm |
Diameter - Metric | 20mm |